bdbssb

Grabby La Toosh setting speed Set the "maxForwardSpeed" to the speed you want to achieve. Then with no load test if you can reach that speed. If not, then decrease the "minForwardGearRatio" number in small steps until you can reach that speed but no more. Doing this will cause you to loose pulling power. If you loose too much pulling power then increase the "torqueScale" until you have enough to get the job done but no more. You can use my Horsepower chart to determine how much HP you would have at that Torque setting, and finally place that "hp" number in the "hp" attribute. NEVER change the RPM value!, that will disrupt the "Torque Curve" values, and make the vehicle very jittery and inconsistent while accelerating and possibly very unusable if you go to far. The minRpm and maxRpm are tied to the range and graduated steps in the torque curve. Grabby La Toosh increase pulling power Search for "torqueScale", it will be contained in the "motorConfiguration" section in the main XML Increase the number in very small amounts at a time. increasing this number too far will cause very poor acceleration characteristics Grabby La Toosh Engine Setting Definitions minRpm = "1000" - the minimum RPM at which the vehicle is operating. If the value is too high the vehicle tends to get a racing start (spinning or shooting away) - this value depends on: density (total weight in the i3d file) and torque value at the rpm value. maxRpm = "2200" - here is the maximum RPM this value depends on: density (total weight in the i3d file) minRpm and maxRpm are closely tied to the torque curve and should never be changed unless you really know what you are doing! changing these otherwise can cause a jittery and unstable driving experience minForwardGearRatio = Determines the max forward speed - the lower the value the faster the vehicle drives at the same rpm and torque. maxForwardGearRatio = Determines the starting speed - If vehicle is starting out too slow you can decrease the maxForwardGearRatio. minBackwardGearRatio = Ratio of the reverse - the higher the value the faster the vehicle moves backwards hp="xxx" - This does NOT change anything! this is only used for Calculation, change this number to what you want it to be, then you have to do some math - "hp * 0.00434 = xx", that is what you set the tourqueScale to, to get that howsepower. maxForwardSpeed="xx" - This is the speed you are "Limited" to, raise the number to "allow" the machine to go faster, IF it has enough Torque to do so at X load brakeForce="xx.x" - Increase for more braking power lowBrakeForceScale="0.x" - Decrease for less engine breaking power, this is only when you are "coasting", this does not affect the brake pedal <motorConfiguration name="Name that appears in the Store" hp="305" price="0"> <motor torqueScale="1.29" minRpm="850" maxRpm="2200" maxForwardSpeed="63" maxBackwardSpeed="22" brakeForce="13.5" lowBrakeForceScale="0.22" > Do NOT Change > <torque normRpm="0.45" torque="0.9"/> Do NOT Change > <torque normRpm="0.5" torque="0.97"/> Do NOT Change > <torque normRpm="0.59" torque="1"/> Do NOT Change > <torque normRpm="0.72" torque="1"/> Do NOT Change > <torque normRpm="0.86" torque="0.88"/> Do NOT Change > <torque normRpm="1" torque="0.72"/> </motor> <transmission minForwardGearRatio="10.2" maxForwardGearRatio="250" minBackwardGearRatio="32" maxBackwardGearRatio="250" /> </motorConfiguration> How to figure out what torque=HP Torque=hp(.00434)

So huge thanks to fscommando for starting this site to begin with. But the reason for this post is to make people aware of what a great asset a forum can be. Fc updated the site a bit last night to make it a bit easier to see the forum. It’s always been here, it has just been on be very bottom of the page. I will try to do better myself to keep on the subjects. Please feel free to start new topics as well. You don’t have to limit topics to mods via the link in the files. Hit the start new topic button and feel free to ask away. Thank to everyone on the site. Let’s keep the traffic up to keep the site alive.

So huge thanks to fcommando for starting this site to begin with. But the reason for this post is to make people aware of what a great asset a forum can be. Fc updated the site a bit last night to make it a bit easier to see the forum. It’s always been here, it has just been on be very bottom of the page. I will try to do better myself to keep on the subjects. Please feel free to start new topics as well. You don’t have to limit topics to mods via the link in the files. Hit the start new topic button and feel free to ask away. Thank to everyone on the site. Let’s keep the traffic up to keep the site alive.

👍🏼

Is this still an issue with the latest update?

Not familiar with one.

This should be working ok now.

This file working for others now?

👍🏼

👍🏼

You get this worked out? I haven’t heard of this issue with anyone. Anything in your log?

You would need to make a decal the full length of the trailer.

Hello start by watching this. We try to teach people how to do rather than just do. Please feel free to follow the link to my site In the video description and go to contact and click the discord button to join my discord. I can give you better response time there.